Share this product

Grizzly 15" 3 HP Extreme Series Planer w/ Helical Cutterhead.

This product ad may change over time

Share

Grizzly 15" 3 HP Extreme Series Planer w/ Helical Cutterhead.

Users say:

This helical head planer is a great value and has plenty of power and quiet operation. It is vibration free and produces a smooth cut with no snipe. It is also easy to set up and assemble, and is well worth the investment.

G1021X2 15" 3 HP Extreme Series Planer with Helical Cutterhead Maximize the quality of finish straight from the planer. Using the G1021X2 3 HP Planer will save time and effort by quickly flattening and smoothing rough lumber. The G1021X2 features a 15", 4-row helical cutterhead complete with 52 indexable inserts that can each be rot…

New content will be added above the current area of focus upon selection

G1021X2 15" 3 HP Extreme Series Planer with Helical Cutterhead Maximize the quality of finish straight from the planer. Using the G1021X2 3 HP Planer will save time and effort by quickly flattening and smoothing rough lumber. The G1021X2 features a 15", 4-row helical cutterhead complete with 52 indexable inserts that can each be rotated three times to expose new, sharp cutting edges. The indexable carbide inserts are positioned along a helical pattern with the cutting edges at a slight angle to the workpiece. This angle allows for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. The G1021X2 features a powerful 230-volt, 3 horsepower motor to power through cuts up to 3/32" deep at full width or 1/8" deep on material up to 6 wide. Plane material from 3/16" to 6" thick with ease and choose between either 16 or 28 feet per minute feed rates for the perfect finish. The precision-ground cast-iron table travels smoothly up and down on the heavy-duty 4-column supports and can be firmly locked in place for operation. The G1021X2 offers additional features such as extra-large ball bearing return rollers, a large side-mounted handwheel, cabinet-style stand, pedestal-mounted control panel, magnetic switch with thermal overload protection and powder coated paint for years of protection. Like all Grizzly planers, the G1021X2 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G1021X2 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the planer are available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certified SPECIFICATIONS Motor: 3 HP, 230V, single-phase, 12A Maximum stock width: 15" Maximum stock thickness: 6-1/8" Minimum stock thickness: 3/16" Minimum stock length: 6" Maximum cutting depth: 1/8" Cutterhead type: 4-row helical, 52 inserts Insert size, type: 15mm x 15mm x 2.5mm, indexable carbide Cutterhead speed: 5000 RPM Feed rate: 16, 28 FPM Table size with extensions: 15" x 48" Dust port size: 4" Footprint: 21-1/2" x 22-1/2" Overall dimensions: 37" W x 48" D x 44" H Approximate shipping weight: 553 lbs. FEATURES: Pedestal-mounted control panel Board return rollers Precision-ground cast-iron table and extension wings Adjustable bed rollers Magnetic safety switch with thermal overload protection Anti-kickback fingers Four-column support with table locks

Powerful

Easy to Use

Smooth Finish

See more below

G

Grizzly Industrial, Inc.

$2695.00

Visit site

Review summary

AI-generated content

This helical head planer is a great value and has plenty of power and quiet operation. It is vibration free and produces a smooth cut with no snipe. It is also easy to set up and assemble, and is well worth the investment.

Pros

Extremely quiet operation
Powerful performance
Easy setup
Smooth cutting
Two speed gearbox

Cons

Requires minor adjustments
Difficulty finding recommended gear case oil

Read original reviews

Description

G1021X2 15" 3 HP Extreme Series Planer with Helical Cutterhead Maximize the quality of finish straight from the planer. Using the G1021X2 3 HP Planer will save time and effort by quickly flattening and smoothing rough lumber. The G1021X2 features a 15", 4-row helical cutterhead complete with 52 indexable inserts that can each be rotated three times to expose new, sharp cutting edges. The indexable carbide inserts are positioned along a helical pattern with the cutting edges at a slight angle to the workpiece. This angle allows for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. The G1021X2 features a powerful 230-volt, 3 horsepower motor to power through cuts up to 3/32" deep at full width or 1/8" deep on material up to 6 wide. Plane material from 3/16" to 6" thick with ease and choose between either 16 or 28 feet per minute feed rates for the perfect finish. The precision-ground cast-iron table travels smoothly up and down on the heavy-duty 4-column supports and can be firmly locked in place for operation. The G1021X2 offers additional features such as extra-large ball bearing return rollers, a large side-mounted handwheel, cabinet-style stand, pedestal-mounted control panel, magnetic switch with thermal overload protection and powder coated paint for years of protection. Like all Grizzly planers, the G1021X2 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G1021X2 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the planer are available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certified SPECIFICATIONS Motor: 3 HP, 230V, single-phase, 12A Maximum stock width: 15" Maximum stock thickness: 6-1/8" Minimum stock thickness: 3/16" Minimum stock length: 6" Maximum cutting depth: 1/8" Cutterhead type: 4-row helical, 52 inserts Insert size, type: 15mm x 15mm x 2.5mm, indexable carbide Cutterhead speed: 5000 RPM Feed rate: 16, 28 FPM Table size with extensions: 15" x 48" Dust port size: 4" Footprint: 21-1/2" x 22-1/2" Overall dimensions: 37" W x 48" D x 44" H Approximate shipping weight: 553 lbs. FEATURES: Pedestal-mounted control panel Board return rollers Precision-ground cast-iron table and extension wings Adjustable bed rollers Magnetic safety switch with thermal overload protection Anti-kickback fingers Four-column support with table locks

Specifications

Processor Type	N/A
RAM Size	N/A
Storage Capacity	N/A
Display Resolution	N/A
Operating System	N/A
Battery Life (hours)	N/A
Weight (pounds)	553 lbs.
Screen Size (inches)	N/A
Graphic Card	N/A
Number Of Cores	N/A
Hard Drive Speed (RPM)	N/A